Location
Victor Harbor
Equipment
Zoom H4N
DPA 4061& MKH60
Boom pole array
One of my favorite places near Adelaide is a place called Victor Harbor. It’s a seaside town about an hour south of Adelaide that is usually cool and pretty quiet. On a day likely to be over 35 degrees a cool sea breeze was a real bonus. The thing I like most about Victor Harbor is the horse tram. Just of the coast of Victor Harbor is a small island called Granite Island that has a wooden bridge that crosses from the mainland. There is a reproduction of an old horse drawn tram than crosses from the mainland over to the island that runs everyday of the year. It just has a lovely relaxed feel about it as you cross over the ocean to the island and back. For me, it was a great opportunity to record some horse walking sounds away from the city or the sports track, and get a selection of sounds as the horse walks across gravel, concrete and wood. It was also just a fantastic day to be walking near the ocean.
I attached everything to the boom pole so I could hold the mic as close to the horses feet as possible without having to constantly bend over, and it also just gave me more flexibility as I moved around. The bridge itself has a lane for the tram, where the horse walks between the tram tracks and a lane next to it for people to walk along. This meant I could walk right next to the horse without being in anyone’s way. I also could record the tram trundling along if I went to the back of it as the horse was far enough away to only be able to hear the tram.
Victor Harbor
Equipment
Zoom H4N
DPA 4061& MKH60
Boom pole array
One of my favorite places near Adelaide is a place called Victor Harbor. It’s a seaside town about an hour south of Adelaide that is usually cool and pretty quiet. On a day likely to be over 35 degrees a cool sea breeze was a real bonus. The thing I like most about Victor Harbor is the horse tram. Just of the coast of Victor Harbor is a small island called Granite Island that has a wooden bridge that crosses from the mainland. There is a reproduction of an old horse drawn tram than crosses from the mainland over to the island that runs everyday of the year. It just has a lovely relaxed feel about it as you cross over the ocean to the island and back. For me, it was a great opportunity to record some horse walking sounds away from the city or the sports track, and get a selection of sounds as the horse walks across gravel, concrete and wood. It was also just a fantastic day to be walking near the ocean.
I attached everything to the boom pole so I could hold the mic as close to the horses feet as possible without having to constantly bend over, and it also just gave me more flexibility as I moved around. The bridge itself has a lane for the tram, where the horse walks between the tram tracks and a lane next to it for people to walk along. This meant I could walk right next to the horse without being in anyone’s way. I also could record the tram trundling along if I went to the back of it as the horse was far enough away to only be able to hear the tram.
Horse drawn Tramcar
It takes the tram about 20 minutes to cross the bridge and make its way around the island to a little café. I decided to wait on the island for the next trip to return before walking back, this gave me time to grab some scones and a chocolate milkshake. (Almost the perfect combination on a day like today) I sat outside looking at the ocean wishing every day was this good. After my feed I went down to the pier nearby and recorded the sounds of the water beneath the pier. I actually have quite a bit of ocean sounds including water under piers, but I have also discovered that if you pay attention to the ocean on different days, with different strength winds and weather conditions there are actually a lot of different ocean sounds, and I don’t have them all as yet. The pier also had some cool old rusty chains holding old car tyres to it, so I recorded some material as I jingled and clanked the chains. Walking back I collected some more horse material. I usually record a lot more material that I think I’ll need, but sorting through 40 minutes of horse hoof sounds will give me a better chance of getting some nice clean good quality samples.
In the evening I decided to grab some sounds at my brother’s place. They have a baby grand piano and I have wanted to get some samples of a grand for a while. However it has been so long since it has been tuned that I am going to have to classify all the sounds as honky tonk piano because they sound like an old piano from a western film. Good quality sounds, and I am sure someone will find them useful, but not quite the piano I was expecting to capture. The billiards table was however exactly what I expected, and I recorded a good amount of material with that. Both the piano and the billiards table I recorded with my new DP 4061 mics.
In the evening I decided to grab some sounds at my brother’s place. They have a baby grand piano and I have wanted to get some samples of a grand for a while. However it has been so long since it has been tuned that I am going to have to classify all the sounds as honky tonk piano because they sound like an old piano from a western film. Good quality sounds, and I am sure someone will find them useful, but not quite the piano I was expecting to capture. The billiards table was however exactly what I expected, and I recorded a good amount of material with that. Both the piano and the billiards table I recorded with my new DP 4061 mics.
The kit I purchased has a bunch of different connectors that allow me to mount the mics in various ways. I used a boundary mic mount and a hanging mount to suspend one mic so it dangled down over the strings of the piano and the second was attached right on the lid to capture reflective sounds. In both cases I sued the H4N’s internal mics to capture stereo samples as well. This is almost standard procedure for me now. Whenever I am using the H4N it is usually in 4 track mode with the internal mics active as well. I have grabbed some excellent material using a combination of its internal mics and whatever other mics I feel are appropriate. I placed tow of the 4061 mics on either side of the billiards table and rolled and hit some of the balls around. The room was well insulated and nice and quiet so I collected some very good material. Tomorrow I drive back to Melbourne, bit I am going to have a huge amount of material to sort through and plenty of new samples to add to the library.
RSS Feed