Location
Melbourne
Equipment
Zoom H4N
Mounted
and
Zoom H4
MKH60
Boom Pole Set-up
I needed some skating sounds for a pitch project I was working on and I also wanted some more skateboard material for the library. Luckily a bunch of guys at work go out pretty regularly with their skateboards at lunchtime down to the nearby skate park. I followed along to see what I could get.
I mounted the H4N on the bottom of one of the boards with some Velcro straps. It was generally ok, but meant no rail grinds for the rider. It did capture some very clear samples from the board’s trucks (wheels) it came off once and got a little scratched, but it was otherwise ok. This made me appreciate the more rugged construction of the H4N over the H4 even more. I did have an issue with placing the Velcro. I wanted it nice and tight, but I kept switching the H4N out of record mode with the strap, so I needed to move it slightly. I think this is why it fell off. After a couple of attempts I managed to get it secure so it would not fall off or switch off. I was also using the boom pole to capture extra material. At one stage I got one of the guys to go for a ride while holding the boom pole angled at the board. This got some good material over various surfaces.
Melbourne
Equipment
Zoom H4N
Mounted
and
Zoom H4
MKH60
Boom Pole Set-up
I needed some skating sounds for a pitch project I was working on and I also wanted some more skateboard material for the library. Luckily a bunch of guys at work go out pretty regularly with their skateboards at lunchtime down to the nearby skate park. I followed along to see what I could get.
I mounted the H4N on the bottom of one of the boards with some Velcro straps. It was generally ok, but meant no rail grinds for the rider. It did capture some very clear samples from the board’s trucks (wheels) it came off once and got a little scratched, but it was otherwise ok. This made me appreciate the more rugged construction of the H4N over the H4 even more. I did have an issue with placing the Velcro. I wanted it nice and tight, but I kept switching the H4N out of record mode with the strap, so I needed to move it slightly. I think this is why it fell off. After a couple of attempts I managed to get it secure so it would not fall off or switch off. I was also using the boom pole to capture extra material. At one stage I got one of the guys to go for a ride while holding the boom pole angled at the board. This got some good material over various surfaces.
Velcor is one of my main tools
Capturing grinds and jumps was a little more difficult, and we did end up faking a few extra ones by just holding the board and running it along the rails. This wasn’t because the guys couldn’t grind, it was more for safety and practicality. I needed to get as close to the board as possible to record a good sample, and that became difficult with a real grind. The last thing I wanted to do was trip anyone off their board with a boom pole.
One of the guys cracked his board on a jump which sucked, but it did mean I got the sound of him snapping it in half when we got back to the studio later on. This was a good use of time an gave the guys a reason to perform some crazy moves, not that they usually need much excuse.
One of the guys cracked his board on a jump which sucked, but it did mean I got the sound of him snapping it in half when we got back to the studio later on. This was a good use of time an gave the guys a reason to perform some crazy moves, not that they usually need much excuse.
Rail grinds made to look easy
RSS Feed